产品详情
简单介绍：
RS8-63L/C4007,电动汽车插头、插座箱
详情介绍：
RS6-63/C4007,电动汽车插头、插座箱，价格
◆概述 / General description
●本产品适用于电动汽车在家庭、公司、商场、酒店等厂地充电之用，内部人员无计费使用。本产品满足于IEC62196-2-X标准。
●本产品适用于交流50Hz/60Hz、400V/220V的电路中额定工作电流63A以下（63A、32A、16A）的电动汽车充电用。
●本产采用**技术制造，具有以下特点：
·外形美观、大方，结构合理，有良好的手感。
·使用方便，插座箱设计有联锁控制功能，插座不**相应的插头、电源切断开关不能接通电源、插座的插套中无电流。充电工作完成后，关掉电源切断开关，按下插头壳上的锁扣，插头可清松拿下插头。
·产品设计有漏电保护、连载保护、短路保护。有效保护了人身和车辆的**。具有连锁控制功能，也就是有防盗电功能。
·机械性能良好：*小拔出力≥40N，*大插拔力≤80N。
·关键件的原材料：
a.外壳材料：PA66、GF25%、UL94 V-0
b.插芯材料：BPT、GF20%、UL94 V-0
c.插针材料：铜合金
●This product is used to charge electric automobile in such sites as family house,company,marketplace,hotle and etc.It complies with IEC62196-2-X standards.
●The product is suitable for the circuit of AC 50Hz/60Hz、400V/220V,rated working current 63A and below(63A、32A、16A)to charge electric automobile.
●This product has our patent technology,with following characteristics:
·Good figure,rational structure,good touch feeling
·Easy operation,socket box has interlock function,if elated plug does not insert,power switch will not close, and the socket sleeve has no current. After charging finished,cut off the power switch,push the lock on the plug-shell to take out plug easily.
·The product provides the protections of leakage,overloading,short circui,effectively protect personnel and automobile,interlock function provided also,namely avoid unauthorized electric consumer.
·Good physical performances:minimum pulling force＞40N,maxi pulling force＜80N
·Raw material of critical parts
a.Outer shell:PA66、GF25%、UL94 V-0
b.Insertion core:BPT、GF20%、UL94 V-0
c.Socket sleeve material:Copper alloy
.jpg)
.jpg)
◆概述 / General description
●本产品适用于电动汽车在家庭、公司、商场、酒店等厂地充电之用，内部人员无计费使用。本产品满足于IEC62196-2-X标准。
●本产品适用于交流50Hz/60Hz、400V/220V的电路中额定工作电流63A以下（63A、32A、16A）的电动汽车充电用。
●本产采用**技术制造，具有以下特点：
·外形美观、大方，结构合理，有良好的手感。
·使用方便，插座箱设计有联锁控制功能，插座不**相应的插头、电源切断开关不能接通电源、插座的插套中无电流。充电工作完成后，关掉电源切断开关，按下插头壳上的锁扣，插头可清松拿下插头。
·产品设计有漏电保护、连载保护、短路保护。有效保护了人身和车辆的**。具有连锁控制功能，也就是有防盗电功能。
·机械性能良好：*小拔出力≥40N，*大插拔力≤80N。
·关键件的原材料：
a.外壳材料：PA66、GF25%、UL94 V-0
b.插芯材料：BPT、GF20%、UL94 V-0
c.插针材料：铜合金
●This product is used to charge electric automobile in such sites as family house,company,marketplace,hotle and etc.It complies with IEC62196-2-X standards.
●The product is suitable for the circuit of AC 50Hz/60Hz、400V/220V,rated working current 63A and below(63A、32A、16A)to charge electric automobile.
●This product has our patent technology,with following characteristics:
·Good figure,rational structure,good touch feeling
·Easy operation,socket box has interlock function,if elated plug does not insert,power switch will not close, and the socket sleeve has no current. After charging finished,cut off the power switch,push the lock on the plug-shell to take out plug easily.
·The product provides the protections of leakage,overloading,short circui,effectively protect personnel and automobile,interlock function provided also,namely avoid unauthorized electric consumer.
·Good physical performances:minimum pulling force＞40N,maxi pulling force＜80N
·Raw material of critical parts
a.Outer shell:PA66、GF25%、UL94 V-0
b.Insertion core:BPT、GF20%、UL94 V-0
c.Socket sleeve material:Copper alloy